Category 1, 3 Point Hitch Receiver Drawbar With Suitcase Weight Bracket

(5 customer reviews)


Our indestructible 3 point hitch receivers redefine the tractor ballast box. With our receivers, you no longer have to choose between adding weight and adding tools to get the job done. Now you can do both. Just add suitcase weights for counterweight and hook up to any 2” receiver compatible attachment.


The Category 1, 3 Point Hitch Receiver Drawbar with Suitcase Weight Bracket is made for sub compact tractors and compact utility tractors up to 45 horsepower. This 3 point hitch receiver has a 3” wide weight bracket that is centered on the hitch and works specifically with the 41 to 45 pound cast iron suitcase weights. It comes with 7/8″ lower pins and uses a 3/4″ top pin. It also allows up to eight suitcase weights to be attached in either direction, forward or back, depending on clearances. The standard hitch utilizes a 3″ x 3″ x 1/8″ wall square tube that the 2 inch receiver is fit into and the Super Duty version utilizes a 3″ x 3″ x 3/16″ wall square tube for extra rigidity and is recommended if you intend to use ground engaging attachments in the receiver. The Super Duty hitch also includes a 3/8″ chain hook welded to the top of the receiver.

Category 1 tractors are rated up to 45 horsepower. Not sure if your 3 point hitch receiver is category 0 or 1? Just measure the lower 3 point hitch holes. Category 0 will be 5/8″ diameter and 1 is 7/8″ diameter.

Compatible with:

  • All 3 point hitch receiver category 1 systems
  • Most 3 point quick hitch systems built to the ASE Standard S278.5
  • John Deere iMatch systems 

Comes standard with a super durable finish in your choice of Green -G (matches John Deere Green), Black -B, or Orange -O (matches Kubota Orange) environmentally friendly powdercoat. Select color when ordering.



All Heavy Hitch products are made in the USA by a Minnesota company you can trust. Be confident in the quality and longevity of our products – we use only American made steel and certified welders.

Category 1, 3 Point Hitch Receiver Drawbar with Suitcase Weight Bracket Details:

  • Constructed of 3/8″ thick steel plate and 3″ square box tubing. No cheap angle iron and straps.
  • Works with or without a 3 point quick hitch system.
  • Holds up to (8) 41-45# pound suitcase style weights
  • Compatible with:
    • John Deere part #R66949 or #R66949Y, 42 pound suitcase weights and other comparable weights from Massey Ferguson, John Deere, Case International, New Holland and more.
    • Heavy Hitch 41# weights, H41SC-G and H41SC-B.
    • Most 3 point quick hitch configurations and quickly attaches to John Deere, Kubota, New Holland, Case International, and more.
  • One of the most popular 3 point attachments for John Deere 1 Series sub compact tractors: 1023E, 1025R, 1026R.


SKUs (Standard Duty): HH1-B, HH1-G, HH1-O
SKUs (Super Duty): HH1S-B, HH1S-G, HH1S-O

Please call (1-888-337-8999) or email us if you have any questions.

Designs, specifications, features and information are subject to change without notice.

Additional information

Weight55 lbs
Dimensions24.75 × 18 × 9 in

Black, Green (matches John Deere Green), Orange (matches Kubota Orange)

Super Duty or Standard Duty

Standard Duty, Super Duty

5 reviews for Category 1, 3 Point Hitch Receiver Drawbar With Suitcase Weight Bracket

  1. Carl Boyer

    I bought the Super Duty for my JD X585 last year. Extremely impressed with the workmanship and design. Had consider the Titan, but after reading about some of their poor weld techniques I opted to go with the Heavy Hitch. I don’t regret paying more at all. This is super solid and very versatile. Just ordered the cart today so I don’t have to keep removing the weights to take the drawbar off.

  2. Robert Piantino (verified owner)

    As my wife says, you get what you pay for!!!
    A week ago I ruined a titan hitch while pulling a sod ripper thru sand and small roots. The titan twisted and bent to the point welds failed, and the hitch tube bent bad.
    Today I used the HH weight bar/hitch pulling the same ripper, and removed 50+ bush stumps and roots, mind you it didn’t even scratch the paint. I even broke a shear bolt on the ripper shaft. Now that was some torque!!
    Now if you’re thinking like I was, a year ago, they’re all the same, save yourself some money!! Buy American made and get great quality. Or you can do what I did, and spend money on others and later you’ll be smart and buy the great stuff.
    I will NEVER look to anything but HH for my attachments, my wife agrees with this decision also.

  3. Tom Fuscaldo

    Purchased this for my John Deere X758, great workmanship. Fantastic product. Purchased with weight bar and without.

  4. G Felton

    I have considered buying this hitch for a while, as if it would be as good of quality as my John Deere! Well let me tell you, I just got this and the build quality is better than John Deere’s quality. And if you’re thinking about buying this, just push the buy button and you will not be disappointed on quality or the usefulness of this hitch. And it’s built here in the USA.

  5. Dusty

    A year-and-a-half into use with this hitch receiver (Super Duty version) on my Deere 1025R and I haven’t yet found a single thing about it that isn’t perfect. Eight Deere 42lb suitcase weights fit perfectly. I use this with a 2” ball hitch to move my trailer around the property and couple it with the Heavy Hitch attachment to carry the big trash cans from the barn to the curb. When I need to use the 3-point / iMatch, it’s easy to offload and set aside. This is one of the best accessories I own for my tractor. Highly recommend.

Add a review

Your email address will not be published. Required fields are marked *