Heavy Hitch Tooth Bars
Increase Your Tractor's Bucket Capacity and Improve Digging Performance
*If the blunt edge of the bucket is greater than 3/16″ the tooth bar will not seat properly. See image in photos.
The Heavy Hitch Bucket Tooth Bar is the tool you need to increase your bucket capacity and improve digging performance. The clamp-on tooth bar is universally compatible and will fit on a cutting edge of up to 1/2″… It installs simply with 5/8″ set screws in each tooth shank. All you need is a 5/16′ Allen wrench to install.
Heavy Duty Toothbar
The Heavy Hitch Heavy Duty Bucket Tooth Bar is the heavy duty tool you need to increase your bucket capacity and improve digging performance. Universally compatible: If your cutting edge is between 5/8″-3/4″… Clamp on tooth bars install simply with 5/8″ set screws in each tooth shank. All you need is a 5/16″ Allen wrench to install.
Which Toothbar fits my Tractor?
Finding the right tooth bar is easier than you might think
Grab your tape measure and head over to your garage or wherever it is you keep your tractor.
What you’re looking for is just your tractor’s bucket (see diagram).
There are two measurements to check which size toothbar your tractor needs:
- Measure the inside width of your bucket. This will determine what width you will need.
- Measure the height of your cutting edge. Our Standard Tooth Bar will fit on a cutting edge of up to 1/2″. If your cutting edge is 5/8″-3/4″, you will need our Heavy Duty Tooth Bar.
If you’re still wondering if you got the right dimensions, watch our short instructional video for further help: